Welcome to Ji He City Limited

Company news

Your position:Home > Company news

Installation method of CNC lathe

Release time:2019-11-27 15:20:42

installation method
Lifting and transportation
The hoisting and positioning of the machine tool should use the special hoisting tools provided by the manufacturer, and other methods are not allowed. No special lifting tools are required, and wire ropes should be used for lifting and positioning in accordance with the specified parts of the instructions.
2. Foundation and location
The machine tool should be installed on a solid foundation and located away from the source of vibration; avoid sunlight and heat radiation; place in a dry place to avoid the effects of humidity and airflow. If there is a vibration source near the machine tool, an anti-vibration groove must be set around the foundation.
3. Machine tool installation
The machine tool is placed on the foundation and should be leveled in a free state, and then the anchor bolts should be evenly tightened. For ordinary machine tools, the level reading should not exceed 0.04 / 1000mm, and for high-precision machine tools, the level should not exceed 0.02 / 1000mm. When measuring the installation accuracy, it should be performed at a constant temperature, and the measuring tool needs to be used for a certain period of time. When installing the machine tool, make every effort to avoid the installation method that causes the machine tool to have forced deformation. When the machine tool is installed, some parts of the machine tool should not be removed casually. The removal of the parts may cause the redistribution of the internal stress of the machine tool, which will affect the accuracy of the machine tool.
Scavenging concern

Scavenging concern

Working hours(9:00~18:00)


Copyright 2018-2022   jmxingshuofang.com   All Rights Reserved 

  • 此站支持多端浏览此站支持多端浏览